1,The power must be cut off when the hand is extended below the guide rail. There must be
no accidental connection of the power supply.

2,When using the two upper die function, the plastic suction machine should not extend the hand into
the molding area to touch the product that is cooling, so as to prevent the second hand injury when the upper
mould is down.

3,In the heating area, do not touch the heating device and bake things with your hands. When heating is stopped,
the heating furnace should be raised.

4,When the product length is less than 800mm, the upper gate and upper die must be synchronized. When local adjustment is made,
the gate should be opened first and the upper die should be opened.

5,When partial adjustment is carried out, if the electromagnetic valve is energized for commissioning, attention should be paid to
the possibility of power failure.

6,When the hand contact piece is sent to the switch and adjust the slice position, the knife switch should be closed,
and the hand should not be extended into the knife cabinet under the automatic condition.